Pick a 0.75 kW axis drive without guessing the match
The Siemens 1FL2204-2AG00-1SC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family, sized for 200 V 3AC operation at 0.75 kW with a 3000 rpm rated speed and 2.4 Nm continuous torque — the same 2.4 Nm as the stall figure, which signals the motor runs flat-rated across most of its speed range without torque fold-off. On the load end it carries a 40 mm shaft height keyed shaft (tolerance N), no holding brake, and IP54 protection without an oil seal — so the seal class is fine for cabinet-internal mounting but it is not a through-shaft or food-grade sealed configuration. The feedback device is a 21-bit single-turn absolute encoder terminated through a hybrid AS connector, and Siemens lists this specific build as matched to the SINAMICS S200 drive family — substituting a different 1FL2 frame or feedback option against an S200 project is the most common commissioning trap on this series.
What the duty numbers mean when you size the cabinet
The 200 V 3AC supply class means this motor feeds from a single-phase 200 V or three-phase 200 V bus through the SINAMICS S200 — it is not a 400 V class drive, and the cabinet supply transformer or step-down must land on 200 V before the drive; mixing in a 400 V S210 wiring diagram against this motor is a wiring error, not a tuning one. Group Code R220 and Product Group X0DK on the order record identify the procurement line in Siemens' ordering system — quoting against those codes up front keeps the BOM line traceable back to the exact shaft, brake, encoder and connector combination rather than a family-level description.
Lifecycle, compliance, and how to put it on a PO
Product class is C: items manufactured to order that cannot be returned for credit, so the order has to land with the right options (connector type, brake, shaft, seal) the first time — there is no take-back window if the encoder or cable exit comes back wrong. RoHS compliance has been in force on this configuration since 01-01-18, REACH Article 33 candidate-list information is provided on demand, and the part is not export-controlled (AL:N / ECCN:N), so cross-border shipments do not need an ECCN filing. Shipping pack is one piece per box at 382 x 222 x 240 mm — a single-unit shippable footprint, no pallet handling required.
Quoting and lead time for a BOM line
Because the part is built to order under product class C, production slots are confirmed at quote time rather than pulled from shelf stock — submit the BOM line with the full option string and the S200 drive pairing up front so the quote reflects the real lead time rather than a catalogue placeholder. Independent distribution sources this code against the Siemens ordering data on file; availability and current pricing come back with the RFQ response once the order-code string and the volume are confirmed.