What the 1FL2204-2AG01-0MC0 puts on the cell
The 1FL2204-2AG01-0MC0 is a Siemens SIMOTICS S-1FL2 low-voltage servomotor built to run from a 200 V 3AC supply, delivering a rated power of 0.75 kW at a rated speed of 3000 rpm with both standstill torque M0 and rated torque Mn at 2.4 Nm — a flat torque profile that suits cyclic point-to-point motion on a parts-handling or packaging cell where holding position matters. The 40 mm shaft height frame and the AM21-bit hybrid connector pin this motor to the matched SINAMICS S200 drive line, so the encoder feedback and power cables terminate on a single hybrid plug rather than separate resolver and power leads — that cuts the cable side of the integration and tightens the cell-side footprint against the servo cabinet. Shaft and seal arrangement is deliberately minimum: plain shaft with N tolerance and no holding brake, sealed to IP65 with an oil seal on the body, so the motor is sized for the side of the line where the load is held by the mechanics rather than by the motor itself — a conveyor drive, a labeler feed roll, or an indexer that locks from a downstream cam.
Where the SIMOTICS S-1FL2 / SINAMICS S200 pairing gets used
Low-inertia 1FL2 servomotors in the 0.75 kW frame typically drive the S200 drives on compact machines where dynamic response matters more than absolute torque — small CNC axes, light pick-and-place, electronic packaging lines, and end-of-line indexing stations where the 3000 rpm rating and a 2.4 Nm torque envelope let the mechanism accelerate fast enough to close the cycle budget on its own. Because the encoder feedback rides over the same hybrid cable as the power conductors and is wired back to the matching SINAMICS S200 drive, the loop closes inside a Siemens catalog stack — drive autotunes against the motor nameplate on first commissioning, and the cell-level handshake (drive ready, follow-up enable, in-position) talks through standard S200 I/O without black-box interpretation.
Compliance, catalog slot, and order handling
Catalog identifiers place the 1FL2204-2AG01-0MC0 in Group Code R220 and Product Group X0DK, and the product is classed as a made-to-order C-class item that cannot be returned against credit — meaning stock rotation is one-way and procurement should plan fulfillment against a confirmed BOM line rather than a returnable consignment. Lifecycle status is current and the unit ships as one piece per pack in a 382 x 222 x 240 mm shipper, so the BOM line is straightforward to plan around the standard single-quantity project build or a maintenance spare.