0.75 kW / 200 V 3AC rating envelope
Siemens 1FL2204-2AG01-1HC0 is a SIMOTICS S-1FL2 low-inertia servo motor, shaft height 40 mm, supply voltage 200V 3AC, rated power 0.75 kW, rated speed 3000 rpm, with standstill torque M0 = 2.4 Nm and continuous torque Mn = 2.4 Nm, built as the rotating half of a SINAMICS S200 drive pairing. Because M0 and Mn both read 2.4 Nm at the listed speed, the motor is sized for short-cycle point-to-point motion where the load rarely sits at standstill under torque — the continuous figure is the binding number for sizing the converter, not the headline rating. The encoder is an absolute single-turn 17-bit unit read out through a hybrid connector, IP65 sealed with an oil seal at the shaft exit — the seal is what lets the motor sit on a machine tool gearbox or near a coolant line where splash would otherwise wick into the bearing stack.
Series fit with SINAMICS S200
The motor is declared under the 1FL2 family, sized for the SINAMICS S200 converter line — the encoder format, hybrid cable, and 200 V 3AC bus match the S200 input range without an external step-down transformer. Shaft height 40 mm with a keyed shaft (tolerance N) and no holding brake — feed axis or auxiliary axis use, where the drive does the braking electronically and a mechanical brake would add inertia without holding a vertical load.
Compliance and logistics flags
RoHS substance restriction compliance is declared since 01-01-18, with REACH Art. 33 disclosure obligations handled through the standard Siemens Reach Information channel. Export control reads AL: N / ECCN: N — no special export licence required for cross-border shipment, which keeps the parallel-import paperwork clean for genuine stock moving between authorised regions. Single-piece orderable with carton dimensions 382.00 x 222.00 x 240.00 mm; product class C means the unit is built against the order and is not returnable for credit once shipped.