Built for the SINAMICS S200 bus at 200 V
The 1FL2204-2AG01-1MC0 is a Siemens SIMOTICS S-1FL2 low-voltage servo, 0.75 kW rated, sized at 3000 rpm nominal speed with 2.4 Nm continuous and stall torque on a 40 mm shaft-height frame. It is wired through the AM21bit hybrid connector, carries a keyed shaft with tolerance N, runs without a holding brake, and seals to IP65 with an oil seal on the shaft entry — the package the line builder drops onto the SINAMICS S200 drive without a harness rework.
Why these ratings, not a bigger number, are the fit
0.75 kW at 3000 rpm and 2.4 Nm continuous sets the mechanical envelope — point the S200 at any load where the steady-state torque demand sits at or below 2.4 Nm and the motor has headroom on the thermal curve. The 200 V 3AC supply class ties the motor to the SINAMICS S200 low-voltage drive family; using it on a 400 V drive without an explicit match from the manufacturer would push the DC bus above the insulation coordination the winding is designed for.
Lifecycle, compliance, and what a buyer locks down first
Production status is active (current lifecycle stage), so the 1FL2204-2AG01-1MC0 is a live BOM line — no last-time-buy window is open against this order code. Compliance record: RoHS conformity since 01-01-18 and REACH Article 33 duty-to-inform applies; export control is AL:N / ECCN:N, so no export licence is required for cross-border shipment under that classification. Ordering/admin: group code R220, product group X0DK, product class C (built to order, non-returnable), quantity unit 1 piece — the line gets ordered one motor at a time against the BOM, not pulled from a stocked SKU.
Procurement and RFQ posture
Quoted to order through independent industrial-automation supply: lead time and price confirmed at RFQ against the BOM quantity — no on-shelf stock assertion, no factory-direct sales claim. Packaging is one motor per shipper (382.00 x 222.00 x 240.00 mm) for the 1FL2204-2AG01-1MC0, with pack quantity 1.