Headline ratings — 0.75 kW, 200 V 3AC, shaft height 40 mm
The Siemens 1FL2204-2AG01-1SC0 sits in the SIMOTICS 1FL2 family sized for the SINAMICS S200 drive line, and the headline mechanical and electrical envelope is set on the nameplate: 200V 3AC supply, rated power 0.75 kW, rated speed 3000 rpm, with standstill and rated torque both at 2.4 Nm — so the motor delivers its full continuous torque across the base speed range rather than only at zero rpm. The 40 mm shaft height places this frame in the lower-power end of the 1FL2 range, which is the typical fit for small indexing tables, lab automation axes, and light conveyor or pick-and-place stations — applications where the 2.4 Nm continuous rating and the 3000 rpm ceiling are the selection drivers rather than peak overload.
Mechanical build — keyed shaft, IP65 oil seal, no holding brake
The shaft is supplied with a key and tolerance N (standard fit), which is the conventional choice for positive-drive couplings on a 40 mm-frame servomotor — a shrink-disc or zero-backlash coupling is the usual mating hardware on this size class. Protection class IP65 with an oil seal on the shaft pass-through means the motor body resists dust and low-pressure water jets, and the seal lip keeps cutting fluid and lubricant from migrating into the encoder along the shaft — the practical implication is suitability for machine-tool and light washdown environments, provided the cable entry at the hybrid connector is also mated to a sealed cordset. This build is configured without a holding brake, so the axis relies on the drive's regenerative braking or a mechanical brake downstream for vertical-axis or hazardous-stop retention. If the application needs a fail-safe brake, a different variant code within the 1FL2 frame must be specified — the encoder and connector options also affect the suffix string.
Feedback and drive pairing
The encoder is a 21-bit absolute single-turn (or equivalent high-resolution) variant terminated through the hybrid AS21 connector, which carries both power and signal conductors in one cable assembly — this is the wiring simplification that the 1FL2 / SINAMICS S200 pairing is designed around, and it cuts the cabinet-side terminations to a single cordset per axis. Matching drive is the SINAMICS S200, so the motor and drive are validated as a system on the manufacturer side. Cable selection (motor power + hybrid signal) and the S200 firmware version still need to be checked against the commissioning tool before the axis is brought online.
Lifecycle and build-to-order posture
Group Code R220 and Product Group X0DK are the internal ordering metadata that link this MPN to the 1FL2 sales and logistics structure; they are useful for matching a purchase order line against the factory's order-entry system but are not functional ratings.