0.75 kW on a 40 mm flange, aimed at S200
The 1FL2204-2AG10-0HC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 1FL2 family sized for the SINAMICS S200 drive line — a 0.75 kW continuous rating at 3000 rpm nominal, with a 2.4 Nm standstill torque (M0) and a matched 2.4 Nm rated torque (Mn) on a 40 mm shaft height. Supply voltage is 200V three-phase, with a 17-bit hybrid AS connector, plain shaft (tolerance N), an integral holding brake, and IP54 protection — meaning the housing resists splash and dust but is not rated for direct washdown or submerged duty.
What the ratings decide on the bench
The 2.4 Nm / 2.4 Nm M0=Mn pairing tells you this motor is sized for applications where continuous torque and standstill torque are matched — typical for horizontal-axis point-to-point motion, indexing tables, and small gantry axes where the motor rarely operates far into its peak overload region. Rated against SINAMICS S200, the drive-to-motor pairing is the engineering boundary that matters: the cable and connector are the hybrid AS series, so any field replacement should reuse the S200 cable set rather than improvising — a mismatched cable or feedback type is the most common reason an S-1FL2 reports a multi-turn encoder fault at first commissioning.
Order class and what that means at RFQ
Siemens classifies this motor as class C — a build-to-order product that cannot be returned or credited against the original order — so the BOM line should be locked in before the RFQ goes out; surplus returns against this code are not a path.
Compliance documentation on record
RoHS substance compliance has been confirmed since 01-01-18, and REACH Art. 33 candidate-list duty-to-inform is on file via the published Reach Information notice — these are the two substance-related compliance items Siemens publishes for this motor; no UL/IEC file number is on this spec sheet.