SIMOTICS S-1FL2 paired with SINAMICS S200
The 1FL2204-2AG10-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 product family, specified by Siemens for use with the SINAMICS S200 drive system. The motor runs on a 200 V three-phase supply, delivers 0.75 kW at a rated speed of 3000 rpm, and produces a standstill torque of 2.4 Nm that matches the rated torque, so the operating envelope is flat rather than tapered across the speed range. Because the encoder and power cabling route through a single hybrid connector and the 40 mm shaft height is short for the power class, the S-1FL2 line is the compact-motion counterpart to the larger S-1FK/S-1FT servomotors in the Siemens catalog — a fit when a small-frame axis must move cleanly inside a control cabinet or a tightly packaged machine module.
Mechanical and electrical envelope
The motor is built on a 40 mm shaft height with a plain shaft, tolerance N, and includes an integrated holding brake so the axis holds position when the drive enable drops — a useful detail for vertical axes or any application where a de-energised coast would create a hazard or a drift problem. The protection class is IP54 without an oil seal, which means the housing keeps dust and splashing water out but the through-shaft is not sealed for oil-mist environments; an oil-seal variant is the correct choice when gearbox oil can reach the shaft exit. The listed product group is X0DK and the group code is R220, the two internal Siemens classification keys that show up on the packing label and the declaration of compliance. The 24-bit single-turn absolute encoder (AS24 bit per the description text, read as the multi-turn-capable absolute encoder option Siemens fits on the 1FL2) gives the drive the position feedback it needs for indexing and cam profiles without a homing routine on every power-up, and the hybrid connector carries both the power conductors and the encoder signals in one plug — a clean cable run when the cabinet is tight on gland-plate space.