What the ratings mean for your machine design
The 1FL2204-2AG10-1SC0: The SIMOTICS S-1FL2 series covers the compact end of Siemens servo drive compatibility — this unit delivers 0.75 kW mechanical output at 3000 rpm with a continuous standstill torque of 2.4 Nm, so the motor's speed-torque curve drops linearly from that 2.4 Nm stall point to zero at 3000 rpm. For a positioning axis driven by the SINAMICS S200, that continuous torque rating is the sizing anchor — the peak torque margin above it is set by the drive's current limit, not the motor's thermal ceiling. IP54 ingress protection means the motor case is sealed against dust greater than 1 mm and protected against water spray from any direction — adequate for enclosed cabinet environments and splash-prone factory floors, but not for washdown or hose-down conditions that would demand IP67 or IP69K. The hybrid AS21 encoder connector integrates the brake and encoder signals into a single hybrid connector, reducing the cabinet-side connector count compared to a split brake-cable solution. The integrated holding brake holds the motor shaft stationary when the drive is de-energised — standard for any vertical-axis or gravity-loaded mechanism where the load would otherwise backdrive the motor at power loss. The 200 V 3AC supply rating places this in the low-voltage three-phase servo class, matched to the SINAMICS S200's output voltage range.
Made-to-order sourcing — product class C
The product class is listed as C — manufactured to order, not stockable, and not returnable against credit. This is not a line held in ready inventory; it is booked against your BOM quantity and produced to your order. Lead times are therefore confirmed at quote time rather than against a live stock figure. RoHS compliance is confirmed from January 2018 onward, and REACH Article 33 duty-to-inform documentation is available — relevant if you are preparing an EU MDR or industrial equipment declaration for the end machine. No export control restrictions apply (AL: N / ECCN: N), so global shipment to standard destinations is unimpeded.