Servo motor for the SINAMICS S200 shelf
1FL2204-2AG11-0MC0 is a SIMOTICS S-1FL2 low-inertia servo motor from the 1FL2 family, listed for 200 V 3AC supply with a rated power of 0.75 kW at a rated speed of 3000 rpm and a stall/continuous torque of 2.4 Nm. The shaft height is 40 mm, the shaft is a plain cylindrical non-keyed design with tolerance N, and an integrated holding brake is fitted as standard. The motor is matched to the SINAMICS S200 drive line — the description explicitly pairs it as the drive-matched servo for that platform, which is what governs the connector, encoder resolution, and electronic nameplate handshake at commissioning. Encoder feedback is 21-bit absolute multi-turn (AM21bit), resolved through a hybrid connector on the motor side, so the cable set is determined by the S200 drive variant rather than chosen freely.
What 0.75 kW, 2.4 Nm, and IP65 actually buy you
At 0.75 kW and 2.4 Nm continuous, the motor sits in the small-format S-1FL2 bracket — it drives small indexing tables, light feeders, end-of-arm tooling, and labelling or dosing axes rather than main conveyor or extruder barrels. The 2.4 Nm figure is the rated continuous torque at 3000 rpm, so the same motor delivers approximately the same torque at standstill for short holding duty before the continuous-torque thermal envelope takes over. IP65 with an oil seal means the body and shaft seal are rated for dust-tight duty and low-pressure water jet cleaning — adequate for washdown zones and machine-tool coolant splash but not for full submergence or high-pressure food-and-bev sanitation. The holding brake is built in, so the axis holds position with the drive disabled, removing the need for an external fail-safe brake on vertical or inclined axes.
Compliance and procurement identifiers
Compliance with the RoHS substance restrictions has been declared since 01-01-2018, and REACH Article 33 duty-to-inform is active per the current candidate list. Export-control classification on the record is AL:N / ECCN:N, meaning the part is not licence-controlled for export from the point of the manufacturer's declaration.
Sourcing posture for this order code
Class C means production is against the order, not from a stocked catalogue line, so the right procurement move is to specify it into the BOM by full order code, confirm the SINAMICS S200 drive variant on the receiving end, and quote the required quantity — availability and pricing then come back against the RFQ rather than off a shelf.