0.75 kW / 3000 rpm / 2.4 Nm in a 40 mm shaft-height frame
The 1FL2204-2BF01-0SC0 is a Siemens SIMOTICS S-1FL2 low-inertia servomotor sized for 0.75 kW continuous output from a 400 V 3AC supply, with a rated speed of 3000 rpm and both standstill and rated torque of 2.4 Nm, which means the motor holds its rated torque right down to zero speed — useful for indexing and stop-and-hold moves on packaging and small-parts handling lines. The shaft height is 40 mm and the body carries IP65 protection with oil seal, so the assembly is rated for cabinet-door or near-panel mounting where coolant splash and oil mist are present, not for direct washdown or submerged duty.
Mating half, feedback, and brake options on this variant
Feedback is a 21-bit single-turn absolute encoder brought out through a hybrid connector, which carries power and signal in one plug and cuts the cabinet-side wiring to a single cable run back to the drive — confirm the matching SINAMICS S200 power/signal cable assembly before committing the BOM line. The shaft is a plain cylindrical design with tolerance N and the variant does not include a holding brake, so any vertical-axis application that needs a fail-safe hold at power loss must be satisfied with an external mechanical brake or by selecting the braked sibling order code in the 1FL2 family.
SINAMICS S200 drive pairing
The product family designation names the 1FL2 servomotors as the matched rotating assembly for the SINAMICS S200 drive platform, so the drive sizing tables in the S200 documentation are the correct source for the converter module, line filter, and braking resistor selection — the motor's rated and peak currents are what feeds those tables, not the 0.75 kW figure alone.
Lifecycle, product class, and order-code administration
The lifecycle stage is recorded as current and the product is listed as active, so the part remains in normal production scheduling — no official successor or last-time-buy window is on the record. The product class is recorded as class C: products manufactured or produced to order, which cannot be reused or re-utilized and are not returnable against credit — meaning once the factory cuts the build, cancellation or return is not an option, and the BOM quantity should be firm before the line is released. Administrative codes on the order line are Group Code R220 and Product Group X0DK, with one piece per quantity unit and one piece per shipping pack, so inbound receiving should expect a single motor per box with packaging dimensions of 315.00 x 182.00 x 172.00 mm.
Compliance and export posture
RoHS substance-restriction compliance has been declared since 01-01-18, and REACH Article 33 candidate-list duty-to-inform applies, so the declaration pack should carry the current REACH candidate-list statement alongside the RoHS conformity — typical for European-market Siemens drives and motion spares. Export control on the line is recorded as AL: N and ECCN: N, so the part is not subject to a dual-use export licence for the standard destinations and can move on the normal commercial paper flow.