What 1FL2204-2BF01-1SC0 ships with
The Siemens 1FL2204-2BF01-1SC0 is a SIMOTICS S-1FL2 low-voltage servo motor paired as the matched shaft machine for SINAMICS S200 drives — the drive-motor pairing is part of the model name '1FL2 servomotors for SINAMICS S200', so the cable set and electronic nameplate geometry come off the same product family rather than a third-party retrofit (cites:,). It draws from a 400 V 3AC supply and is rated 0.75 kW with a rated speed of 3000 rpm; both standstill torque M0 and rated torque Mn sit at 2.4 Nm, which means continuous and starting torque are matched here and the application drives well below the M0 ceiling (cites:). Mechanically the motor is shaft-height 40 mm with a keyed shaft to tolerance N and ships without a holding brake; feedback is the absolute AS21 single-turn encoder (21-bit resolution) on a hybrid connector, and sealing is IP65 with oil — an in-cabinet/dry-side rating, not a wet-line rating (cites:).
Sizing for the panel and the load
With M0 = Mn = 2.4 Nm at 0.75 kW and 3000 rpm, the constant-power knee sits at rated speed — applications that need to run above base speed into a constant-power region have to be checked against the drive's field-weakening map, because this motor label does not call out a separate extended-speed point (cites:). AS21-bit feedback defines the velocity-loop resolution; before commissioning, match the load inertia to the rotor inertia so the auto-tuner's default gains land close — mismatched inertia is what turns a clean step response into a resonance hunt on the scope (cites:,). Packaging dimensions 315.00 x 182.00 x 172.00 mm are the box footprint, not the motor outline; plan panel space for the SINAMICS S200 line-side wiring and feedback cable bend radius alongside the motor envelope (cites:).
Lifecycle status and BOM planning
Lifecycle stage is recorded as current and the part's product class is 'C: products manufactured / produced to order, which cannot be reused or re-utilized or be returned against credit' — once ordered against a confirmed BOM line, returns are not on the table, so the RFQ quantity should be sized to the real build (cites:,). Group code R220 and product group X0DK are the Siemens-internal ordering keys the buyer carries forward into RFQ and invoice reconciliation — match them on the PO line against the Siemens configurator output before release (cites:,).