The Siemens 1FL2204-2BF11-0HC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, built to pair with a SINAMICS S200 drive on a 400 V three-phase bus. It is rated 0.75 kW at a rated speed of 3000 rpm, with both standstill torque M0 and rated torque Mn at 2.4 Nm — the M0/Mn equality signals a short-duration overload profile typical of point-to-point motion, not continuous high-torque duty. Feedback is a 17-bit single-turn absolute encoder delivered through a hybrid connector, the shaft is a plain (non-keyed) tolerance N output, and a holding brake is fitted — meaning the drive expects an enable/brake interlock sequence in the SINAMICS S200 commissioning rather than a free shaft.
Fit on the SINAMICS S200 and panel-side notes
The 40 mm shaft height and 1FL2 family geometry identify this as the S200's compact low-inertia frame; the drive side is dictated by the matching SINAMICS S200 converter, not a generic third-party servo drive. Protection class is IP65 with oil seal — the sealing package tolerates coolant splash and cutting-fluid mist around a machine tool spindle or a washdown-adjacent axis, but the hybrid connector engagement still dictates the real ingress rating at the cable gland. Group code R220 and product group X0DK are the Siemens admin strings to put on the PO; mismatch here is the most common cause of a wrong motor showing up at receiving, since the visible part number is otherwise easy to transpose against adjacent 1FL2 codes.
Lifecycle status and ordering reality
Lifecycle stage is current and product status is Active, so the part is in normal production today — not a last-time-buy window. RoHS compliance is recorded since 01-01-18, REACH Art. 33 disclosure is on file, and the export control markings (AL:N / ECCN:N) mean no special licence for typical cross-border industrial shipments. Pack-out is one piece per carton at 382.00 x 222.00 x 240.00 mm — receive on a bench with the carton upright and stage near the panel before unwrap.