Matched to SINAMICS S200, sized for the 40 mm shaft-height frame
The 1FL2204-2BG11-0HC0 is a SIMOTICS S-1FL2 low-voltage servo motor in the 1FL2 family matched to the SINAMICS S200 drive line. Rated Pn = 0.75 kW at Nn = 3000 rpm with M0 = 2.4 Nm and Mn = 2.4 Nm on a 200 V 3AC supply — the equal rated and stall torque figures mean the motor delivers full continuous torque right down to zero speed, which is the figure that matters for short-cycle indexing axes. The 40 mm shaft height, plain-shaft tolerance N, and AS17bit hybrid connector lock the motor to its 1FL2 family footprint and to the S200 cable set. Protection class IP65 with oil seal so the motor body holds up to coolant mist and incidental washdown on a machine tool or packaging axis — the seal is on the shaft, not just on the housing face.
Brake, encoder, and supply envelope
An integral holding brake is included, so the assembly is orderable as a single line on the BOM rather than a motor-and-brake pair. The 17-bit single-turn absolute encoder (AS17bit) reports absolute shaft position to the drive on power-up, removing the need for a homing move after every controller restart. Packaging dimensions 382.00 x 222.00 x 240.00 mm frame the shipping cube for the 40 mm shaft-height motor. Product class C means the unit is built to order and cannot be returned against credit — a BOM freeze before placement matters more than usual on this line.
Lifecycle and BOM-fit posture
Lifecycle stage is current and product status is Active — the 1FL2204-2BG11-0HC0 is in active Siemens production. Compliance: RoHS conformity since 01-01-18 and REACH Art. 33 duty-to-inform. Export classification AL: N / ECCN: N — no licence flag on cross-border shipments for this code. The SIMOTICS S-1FL2 family is the standard companion servo for the SINAMICS S200 drive, so for an existing S200 panel the BOM fit is plug-and-driveless on the wiring harness.