What this motor is and where it bolts in
The 1FL2204-2BG11-0MC0 is a SIMOTICS S-1FL2 low-voltage servo motor sized for 200 V 3AC supply, rated 0.75 kW at 3000 rpm with 2.4 Nm continuous torque, in a 40 mm shaft-height frame with plain shaft, tolerance N, and a holding brake. It belongs to the 1FL2 servomotor family and is paired with the SINAMICS S200 drive system, so the cable, encoder, and connector scheme follow the S200 ecosystem rather than the older S210/V90 line — confirm drive firmware and connector pinout against the S200 commissioning guide before wiring.
IP65 with oil seal, hybrid connector, holding brake
Protection class is IP65 with oil seal, meaning the motor body and shaft seal hold up against low-pressure water jets and oil mist typical of a machine-tool or near-CNC environment, though not full washdown immersion. The 21-bit AM21bit absolute encoder is wired through a hybrid connector on the motor face, and the integrated holding brake lets the axis hold position when the drive is disabled — relevant for vertical or suspended loads where the brake is the secondary safety element after the drive's own disable.
Lifecycle status and what that means for the order
For a small shop dropping this into a machine build, the practical read is: confirm the BOM line, get a current quote against the actual quantity you need, and build the lead time into the project schedule — don't plan on next-day delivery from a surplus bin.
Compliance documentation on file
RoHS compliance has been in force since 01-01-18, and REACH Article 33 duty-to-inform is satisfied via the standard Reach Information document — request the latest candidate-list confirmation at quote time if your build needs the current SVHC list cross-checked. Export control is AL:N / ECCN:N, meaning no special export license routing for typical destinations; packaging is one piece per carton at 382.00 x 222.00 x 240.00 mm.