Form factor and mechanical build
The 1FL2204-2BG11-1MC0 is a SIMOTICS S-1FL2 low-inertia servo with a 40 mm shaft height, shaft-key output, tolerance N, and an integrated holding brake — the 21-bit AM21 hybrid connector carries feedback and power through a single cable, so panel-side wiring drops to one cordset per axis rather than separate encoder and power leads. Packaging ships at 382.00 x 222.00 x 240.00 mm for the single-piece unit, a footprint worth budgeting for cabinet intake when the axis is being commissioned alongside the SINAMICS S200 drive it pairs with.
Electrical envelope and drive pairing
Rated 200V 3AC supply with Pn of 0.75 kW and Nn of 3000 rpm, both M0 and Mn at 2.4 Nm — the matching standstill and rated torque tells you the S-1FL2 here is a constant-torque frame across its speed range rather than a field-weakening part, so sizing the drive on continuous current at rated rpm is the right exercise rather than chasing a peak figure. The listing explicitly names SINAMICS S200 as the matching drive, which closes the firmware-and-motor pairing question that usually blocks commissioning — mismatching an S-1FL2 against an older S210 or V90 line changes the encoder protocol and the brake timing.
Sealing and ingress for the wet end
Protection class IP65 with oil seal on this variant means the shaft seal is specified for incidental oil contact — the motor body and the cable entry tolerate washdown and lubricant splash, which opens it up to food-and-bev adjacent lines, machine-tool coolant zones, and gearbox rooms where a standard IP65 motor would still need a separate shaft seal.
Lifecycle and documentation posture
Lifecycle stage reads as active, and the product is built to order under product class C — non-returnable for credit, produced per the order quantity rather than held as finished stock, which the RFQ has to reflect on both lead time and minimum order.