Sizing the axis at 1 kW
The 1FL2204-4AF10-0MC0 is a low-inertia SIMOTICS S-1FL2 servo in the 40 mm shaft-height frame, rated Pn = 1 kW at Nn = 3000 rpm with M0 = 3.2 Nm and Mn = 3.2 Nm — meaning stall and rated torque are equal in this frame, so the motor holds continuous torque across its working speed range without falling off the envelope (cite:). Supply is 400 V 3AC, with a plain shaft (tolerance N), an integrated holding brake, and IP54 protection without an oil seal — the configuration a panel builder expects when pairing the motor with a SINAMICS S200 drive on a positioning axis (cite:).
Connector, brake, and the SINAMICS S200 pairing
Connection is via the hybrid AM21 connector bundled into the 1FL2 family, which carries power and the 21-bit absolute encoder signals over a single cable assembly — a single-cable layout that cuts panel-side gland count and keeps the feedback wiring off the drag-chain bend radius (cite:). The motor lists SINAMICS S200 as the matching drive, so commissioning lives inside that drive's firmware (auto-configuration on the encoder ID) rather than in the motor itself; set the drive axis name and the 1FL2204-4AF10-0MC0 is recognised on first power-up (cite:,).
Lifecycle, codes, and compliance
Order codes carried on the record are Group Code R220 and Product Group X0DK — the two identifiers procurement and stocking systems key on, alongside the made-to-order Product Class C designation that excludes return-for-credit (cite:,).
Packing and handling at receipt
The motor ships one per package in a 382.00 x 222.00 x 240.00 mm box; because the part is Product Class C (made-to-order, no return-for-credit), receipt inspection should confirm shaft, brake, and AM21 connector integrity before signing the carrier's paperwork (cite:,).