Active part — qualified for serial BOM use
Siemens lists 1FL2204-4AF10-0SC0 as active, so it stays qualified on the BOM without an engineering-change churn trigger — the lifecycle stage carries forward into next-quarter builds. The motor belongs to the SIMOTICS S-1FL2 family sized for the SINAMICS S200 drive platform, meaning the drive-motor pair is the intended configuration rather than a retrofit (cites:,). The product class is C — made-to-order, not reusable, not returnable for credit — which a packaging-machinery buyer has to plan around: a per-unit landed cost that cannot be recovered through returns, and an MOQ conversation that lives with the per-piece quantity unit (cites:,).
Motor ratings — what 1 kW at 3000 rpm means on the line
The rating plate reads 400 V 3AC supply, Pn = 1 kW, Nn = 3000 rpm, with M0 = Mn = 3.2 Nm — the rated and stall torque match, so continuous-duty sizing in a packaging conveyor or form-fill-seal axis can run at the rated figure without the usual stall-vs-rated derate margin (cites:). Shaft height is 40 mm with a plain shaft, tolerance N, AS21-bit encoder feedback and a hybrid connector — that combination is the standard 1FL2 low-inertia servo profile for short-cycle, high-acceleration axes; the 21-bit absolute encoder is what lets the SINAMICS S200 close position on power-up without a homing move (cites:,). Holding brake is included and protection class is IP54 without an oil seal — the brake is what holds a vertical axis at rest when the drive is de-energised, and IP54 is the dust and splash rating that suits a sealed panel-room enclosure rather than a washdown cell (cites:).
Drive pairing and commissioning context
Siemens publishes 1FL2204-4AF10-0SC0 as the matching motor for SINAMICS S200 — the S-1FL2 series is engineered against that drive's control loop and the 21-bit encoder resolution, so a commissioning engineer pulls this motor from the S200 drive's motor list rather than configuring it as a third-party servo (cites:,). The hybrid connector AS21 carries power and signal in one plug, which shortens cabinet-side wiring time compared to separate power and feedback connectors — a panel-oem-wireman-friendly detail when several 1FL2 axes sit in the same cabinet (cites:).
Compliance, packaging and logistics footprint
Export control is AL:N / ECCN:N, so cross-border shipment to most destinations does not require an export licence declaration; the carton at 382.00 x 222.00 x 240.00 mm (L x W x H) is a single-piece pack that fits a standard small-parts shelf and ships one motor per box (cites:,).
Sourcing posture — quoted to order
Catalog reference points to keep the BOM line clean: Group Code R220, Product Group X0DK (cites:,).