1 kW / 3.2 Nm in a 40 mm frame, 400 V 3AC
The 1FL2204-4AF11-0HC0 is a SIMOTICS S-1FL2 low-inertia servo from the 1FL2 family, built to run on the SINAMICS S200 drive platform with a 400 V 3AC supply. Rated continuous power is 1 kW at a rated speed of 3000 rpm, with standstill torque and rated torque both at 3.2 Nm — so the motor holds rated torque all the way down to zero speed without a derating step. The 40 mm shaft height and equal standstill/rated torque figure make it a fit for point-to-point motion, indexing tables, and small-format pick-and-place axes where the load inertia sits close to the motor face and the drive cycle demands torque at low speed, not high-speed constant-power.
Encoder, brake, and IP65 with oil seal
Feedback is a 17-bit single-turn absolute encoder (AS-i protocol over the hybrid connector), resolution compatible with the SINAMICS S200 commissioning toolchain — no external encoder cable run, the comms and power share one connector. A holding brake is fitted; the plain shaft with tolerance N is the standard machine-side interface for coupling or pinion mounting. The housing carries IP65 with an oil seal on the shaft pass-through, so the motor tolerates cutting-fluid splash and coolant mist typical of a milling or turning cell — the seal is the wet-end barrier, the housing rating is the dry-end rating.
Pairing and order data
This stator variant is listed as the matching motor for the SINAMICS S200 PN drive line, so the controller commissioning screens pre-load the 1FL2 motor data block — the integrator selects the motor code rather than entering parameters manually. Ordering data carries product group X0DK and group code R220, with product class C meaning the unit is built to order and cannot be returned against credit — the BOM line should be sized to the actual build quantity, not a safety stock buy. The unit ships as one piece in a 382.00 x 222.00 x 240.00 mm package.
Compliance and lifecycle status
Production status is current per the lifecycle record, and the unit is RoHS-compliant since 01-01-18, with REACH Art. 33 candidate-list substances flagged through the standard Siemens Reach Information page. Export control marks the part AL:N / ECCN:N — no special export licence required for the standard commercial shipment.
Sourcing posture for an active built-to-order motor
Because the product class is built-to-order with no return-for-credit option, the RFQ should carry the target commissioning window so the factory schedule aligns with the cabinet install date.