1 kW 400 V 3AC servomotor sized for the SINAMICS S200 drive line
The Siemens 1FL2204-4AF11-0SC0 is a SIMOTICS S-1FL2 low-inertia servomotor rated 1 kW continuous at 400 V 3AC, with a rated speed of 3000 rpm and continuous/stall torque of 3.2 Nm on a 40 mm shaft height — the dimensions and torque class that match the SINAMICS S200 PN converter family it is built to pair with. The unit ships with a holding brake, a plain shaft with N tolerance, an AS21-bit hybrid connector, and IP65 protection with an oil seal — the enclosure class that lets it sit on the machine frame near the load without a separate shroud, as long as the cable entries are mated to IP65-rated cord sets.
400 V class, 3.2 Nm continuous — what the torque / speed envelope means for sizing
A 3.2 Nm continuous rating at 3000 rpm puts this motor in the compact low-inertia class for dynamic point-to-point motion — sized for small indexing tables, light gantries, and packaging/converting feeders where the 1 kW mechanical output matches the load inertia and the SINAMICS S200 drive stack.
Lifecycle: active, made-to-order, with full RoHS and REACH coverage
The product class is C: built to order, not reusable and not returnable for credit — this is the Siemens order code so the config is fixed at the time of order and a returned unit cannot be re-stocked as new, so the BOM line should be double-checked against the SINAMICS S200 project list before release. RoHS compliance has been maintained since 01-01-18, and REACH Article 33 duty-to-inform applies per the current candidate list — the compliance documentation a declaration pack buyer would expect for EU shipments is available on request rather than auto-shipped with the motor.
Cataloging trail: Group Code R220, Product Group X0DK
Siemens lists the motor under Group Code R220 and Product Group X0DK — the internal identifiers a procurement system needs to match the part to the SINAMICS S200 accessories and the Siemens configurator entry, not a buyer-facing spec but useful for cross-referencing the PO line against the factory order acknowledgement. Packaging is one piece per shipper at 382.00 x 222.00 x 240.00 mm, and the part is not export-controlled (AL:N / ECCN:N) — which keeps cross-border movement simple and means no ECCN filing is required for standard export shipments.