What the order code resolves to
The Siemens 1FL2204-4AG00-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, designed to pair with the SINAMICS S200 drive on a 200 V 3AC supply rail. It carries the build-to-order product class (non-returnable, manufactured per spec), ships as a single piece, and falls under group code R220 / product group X0DK for BOM alignment.
Where the headline ratings land in a sizing exercise
Rated 1 kW at a base speed of 3000 rpm with continuous standstill torque M0 = 3.2 Nm and rated torque Mn = 3.2 Nm, so this frame delivers its full torque envelope off zero rpm up to the base speed — the axis sees no torque-derate window before transition into field weakening. The 40 mm shaft height and 200 V 3AC bus position it for cabinet-mounted automation axes (small gantries, pick-and-place, auxiliary conveyors) where a 400 V-class supply is not available at the machine. The motor is delivered with a plain shaft (tolerance N), no holding brake, and IP54 protection without an oil seal — meaning the housing sheds dust and light splash but is not sealed for wet-area or food-grade washdown duty, and the axis needs an external holding function if vertical loads must be held at rest. Feedback is the hybrid connector AM21bit interface — the drive-end connection is the matching socket on the SINAMICS S200, not a third-party encoder cable; verifying the connector variant on the drive side before issuing the purchase order avoids a field rework.
Procurement notes for a project B
Group code R220 is the storeroom charge code and product group X0DK is the BOM category — both are required on the PO line so the build-to-order factory routes the order into the correct production pool and the receiving team files the line under the right plant label.