What the nameplate says
The 1FL2204-4AG00-1SC0 is a SIMOTICS S-1FL2 low-inertia servo rated 1 kW continuous on a 200 V 3-phase AC bus, with a rated speed of 3000 rpm and a standstill/rated torque of 3.2 Nm on both M0 and Mn, on a 40 mm shaft height with a keyed shaft to tolerance N and no holding brake. It belongs to the 1FL2 servomotor family intended to pair with the SINAMICS S200 drive family, so the drive-side configuration file and the motor-side power/encoder cable set are matched at the catalog level rather than at random.
Shaft, feedback, and sealing
Feedback is a 21-bit absolute encoder brought out on a hybrid connector — the hybrid variant carries power and signal in one shell, so the cabinet-side cable is the corresponding pre-assembled hybrid lead and not a separate resolver/encoder pair. Protection class is IP54 without an oil seal; the shaft lip is dust-protected and splash-resistant, but the motor is not the right choice where coolant or cutting oil reaches the shaft — for that duty the oil-seal variant is the documented option, not this code.
Procurement note
Order quantities are placed per piece in a single-pack carton of 382.00 x 222.00 x 240.00 mm; sourcing is run against the BOM at RFQ because product class C rules out standard stock-and-return handling.