1 kW / 3.2 Nm at 3000 rpm — SH40 with brake
The SIMOTICS S-1FL2 1FL2204-4AG10-0HC0 is rated 1 kW at 3000 rpm on a 200 V 3AC supply, with M0 = Mn = 3.2 Nm on the SH40 frame and an integrated holding brake for vertical-axis holding. It is paired with the SINAMICS S200 drive and uses the hybrid AS17 connector at 17-bit resolution — the resolver/encoder variant lives in the dash-4AG10 suffix, not in a separate accessory, so the mating cable set must match. IP54 protection class and a plain shaft with tolerance N fit typical packaging, light-conveyor, and small-format axis duties where shaft sealing is not a requirement — the housing keeps out splash and dust but is not rated for washdown.
Active, built-to-order — no surplus channel
Lifecycle stage is current on the Siemens record, with no successor or cross-reference listed — this is a live catalogue line, not a discontinuation watch item. The product is built-to-order under product class C: once a build lot is released, units cannot be returned for credit or re-used, so the BOM line should be sized for the build quantity rather than walked back through inventory.
Sourcing posture for a 1FL2 build
Because the part is built-to-order, it is quoted against the BOM line at RFQ — pricing and a confirmed build window come back with the order acknowledgement rather than off the shelf, so the procurement clock is the factory's build slot plus transit, not a same-day pick. Single-piece packaging at 382 x 222 x 240 mm and a Group Code R220 / Product Group X0DK identity are the only order-side identifiers on the spec sheet — quote these when raising the RFQ so the line routes to the correct SIMOTICS build slot.