Identifying the motor on the BOM line
The 1FL2204-4AG11-0HC0 is a SIMOTICS 1FL2 low-inertia servomotor from the family paired with the SINAMICS S200 drive platform, carrying group code R220 and product group X0DK. Its published rating is a 1 kW continuous shaft output at 3000 rpm with a stall/continuous torque of 3.2 Nm on a 200 V three-phase supply, in a 40 mm shaft-height frame with a plain shaft, tolerance N, and a holding brake.
What those ratings mean for the design
Holding torque equal to rated torque (M0 = Mn = 3.2 Nm) means the motor's overload headroom sits in speed, not torque — sizing should be done at the worst-case load inertia reflected back through the gearbox, not from the rated figure alone. IP65 with oil seal on a 200 V 3AC servo indicates a sealed machine body rated for plant environments with coolant splash and oil mist — the shaft seal, not the housing alone, is what keeps the bearing cavity dry in cabinet-adjacent mounting. The 17-bit absolute encoder and hybrid connector lock the motor to the SINAMICS S200 electronics — substitution into a different drive family means swapping both the connector and the parameter set, so any BOM re-spec needs the matching drive on the same line.
Mechanical footprint on the bench
Single-piece packaging dimension is 382 x 222 x 240 mm, which is the carton envelope to plan for at receiving — not the motor's installed footprint — so a panel-side unbox station needs that clear floor area before the shaft-height 40 mm frame goes onto the machine.
Compliance and lifecycle posture
Lifecycle status is current; the part is built to order under product class C — produced to order with no return-for-credit pathway — which is the Siemens commercial posture for configured servo SKUs and shapes how stock and lead time behave on quote.