What this servo is sized to do
The Siemens 1FL2204-4AG11-1HC0 is a SIMOTICS S-1FL2 low-inertia servomotor in the 40 mm shaft-height frame, rated Pn = 1 kW on a 200 V 3AC supply with Nn = 3000 rpm and a continuous stall/run torque of M0 = Mn = 3.2 Nm, so the headline numbers carry through base speed without a torque break — that matters for sizing the cycle budget on a conveyor, index table or small-format pick-and-place axis where the load sits inside the constant-torque band. It is wired to the matching SINAMICS S200 drive via the integrated hybrid connector, ships with a holding brake for vertical-axis retention on power-loss, and is sealed to IP65 with an oil seal on the shaft — the right-sized spec for a factory-floor cabinet where occasional coolant splash or oil mist hits the motor housing, not for a fully washdown-rated cell.
Feedback, brake and shaft — what the option string actually buys
The option code -1HC0 reads out as an AS-i 17-bit absolute encoder for position feedback, a keyed shaft with N tolerance for a positive-locking mount, and the factory-fitted holding brake — each one of those is a buyer call: the 17-bit single-turn resolution drives the achievable positioning repeatability on the S200, and the brake lets the drive drop the axis into a held state without an external spring-set unit.
Lifecycle, order class and paperwork
Compliance paperwork on file covers RoHS conformity since 01-01-18, REACH Art. 33 candidate-list disclosure, and dual-use export classification AL:N / ECCN:N — the clean declaration pack the site doc-control function expects, and no extra approvals layer the project has to chase before the motor lands at the panel build.
Sourcing reality for the storeroom
Packaging is one piece per shipper at 382 x 222 x 240 mm, so a single-unit replacement order goes out as a small parcel rather than a crate — and given the made-to-order class, the unit price and lead time are both confirmed against the RFQ rather than read off a shelf tag, which is the honest posture for any S-1FL2 BOM line.