What sits behind the order code
The 1FL2204-4AG11-1MC0 is a SIMOTICS S-1FL2 low-inertia servo sized at 1 kW on a 200 V 3AC supply, with a rated speed of 3000 rpm and stall/rated torque of 3.2 Nm, built on the 40 mm shaft-height frame to pair with a SINAMICS S200 drive. Feedback is the AM21 21-bit absolute singleturn encoder, the shaft carries a key with tolerance N, and a holding brake is integrated — meaning the motor drops into a standard S200 axis without extra commisioning wiring for the feedback or the brake switch. Mechanical sealing is IP65 with an oil seal on the shaft, so the 1FL2204-4AG11-1MC0 handles washdown-adjacent duty near gearboxes and ball screws where cutting fluid and lubricant mist are present.
Match-the-inertia sizing and S200 pairing
At 3.2 Nm continuous and 3000 rpm the rotor sits squarely in the low-inertia class for high-acceleration point-to-point axes — the kind of profile that exposes any mismatch between load inertia and rotor inertia on the first move. Because the 1FL2204-4AG11-1MC0 is listed as the SINAMICS S200 matched motor, electronic nameplate and auto-configuration flow through the drive on first connect; there is no separate parameter file to load for the 21-bit encoder or the holding brake timing.
Ordering codes, compliance, and packaging
The motor carries Group Code R220 and Product Group X0DK, both standard ordering keys used by Siemens for 1FL2 stock and configured lines. RoHS compliance has been confirmed since 01-01-18, REACH Art. 33 candidate-list information is supplied with the product, and Export Control Regulations are AL:N / ECCN:N — so the part ships without an export licence block on standard cross-border freight. It is sold as 1 Piece per Quantity Unit under product class C, which means each unit is produced to order against the configuration string and cannot be returned against credit — a relevant note for spares planning and cancellation terms. Packaging is a single-piece carton of 382 × 222 × 240 mm, worth confirming against receiving-bay and goods-in shelf footprint when slotting the motor into MRO stores.
Sourcing posture for this code
Configured lines are quoted per the BOM string against an RFQ; availability, current pricing, and the production slot are confirmed at quote time rather than carried as standing stock.