Is the Siemens 1FL2204-4BF01-1MC0 still in active production?
The Siemens 1FL2204-4BF01-1MC0 carries a current lifecycle stage and an active product status on the Siemens record, so this order code is still on the manufacturer's books for the SIMOTICS S-1FL2 family that pairs with the SINAMICS S200 drive line (cites:,). It sits in product class C — built per order, not a stocked returnable SKU — which means the unit ships as a configured piece rather than off-the-shelf shelf stock, and reorder runs cleanly against the BOM at the configured option set (cites:).
What the rated figures mean on this 1 kW servo
At 1 kW rated power and 3000 rpm nominal, with 3.2 Nm stated for both M0 (stall) and Mn (rated), the motor delivers essentially flat torque from standstill to base speed — the no-derate envelope a packaging or indexing line needs at low-speed screw-down or pick-and-place moves (cites:). 400 V 3AC supply ties the 1FL2 directly to the SINAMICS S200 match list, so the drive-to-motor cable set and electronic nameplate hand-off work without manual re-parameterization (cites:). IP65 with oil seal at the shaft, plus the keyed shaft (tolerance N) and the AM21bit hybrid connector for power plus the absolute encoder in one overmoulded plug, drops the panel-side wiring to a single lead exit and keeps the wet-end off the bearings — qualified for washdown-adjacent machinery cells (cites:). No holding brake is fitted on this build, which is the right call for belt- or coupling-driven loads where an external brake is mounted on the gearhead; if the application needs a fail-safe stop, the -1MC0 variant must be reviewed against the -1MK brake-equipped option code before the BOM freeze (cites:).
Compliance and what ships in the box
Export classification is AL:N / ECCN:N, which keeps cross-border shipments straightforward — no special export licence trigger for typical industrial destinations (cites:). Single-piece quantity unit, packed 315 x 182 x 172 mm, so the inbound inspection dock needs to plan for one motor per shipper on production-line replenishment (cites:,).
Sourcing posture for a live BOM line
With lifecycle stage current and active status confirmed, this order code is the right line on a live BOM — quoted to order against the build quantity, with availability and per-unit landed cost confirmed at RFQ rather than off a price sheet (cites:,). Group Code R220 / Product Group X0DK is the Siemens-internal classification for this motor, which keeps the PO line, the inspection document pack, and the Siemens order acknowledgement aligned when the part shows up on a three-way match (cites:,).