What the motor is, sized against the S200 drive
The 1FL2204-4BG11-0MC0 is a SIMOTICS S-1FL2 low-inertia servomotor from the family paired with the SINAMICS S200 drive, rated Pn=1 kW with a rated speed of 3000 rpm and both standstill and rated torque at 3.2 Nm — so the same torque figure holds from zero speed through the working point, a useful match for point-to-point positioning where the S200 has to accelerate the rotor to speed without torque headroom running thin. Mechanical side: 40 mm shaft height, plain shaft with tolerance N, holding brake fitted, IP65 protection class with oil seal, and a 21-bit AM hybrid connector for feedback — meaning the resolver-style encoder signal travels over the hybrid cable rather than a separate DSL line, which keeps the cabinet-side wiring to one cable back to the S200.
Group code, product class, and what that means for ordering
Siemens classifies the part under Group Code R220 and Product Group X0DK — internal identifiers, but the buyer-relevant fact is Product class C: products manufactured or produced to order that cannot be reused, re-utilized, or returned against credit, so a cancelled line on a build-to-order motor is a sunk cost rather than a stock return. Quantity Unit is 1 Piece, packaging quantity 1 in a 382.00 x 222.00 x 240.00 mm carton — the single-piece shipper is consistent with built-to-order rather than shelf-stock; if the cell needs a hot spare, that spare has to be ordered against the BOM, not pulled from a finished-goods bin.
Compliance posture
RoHS compliance since 01-01-18 is declared, REACH Article 33 duty-to-inform is carried through the standard Reach Information link, and the part carries Export Control Regulations AL:N / ECCN:N — not controlled for export, which simplifies shipment to most industrial geographies.