Match-up with the SINAMICS S200 drive
The 1FL2205-2AF01-0HB0 is a SIMOTICS S-1FL2 servomotor in the 1FL2 family, built specifically to pair with the SINAMICS S200 drive — that pairing is specified in the product description, not a coincidence of voltage class. Supply is 400 V 3-phase AC, rated power 1 kW, rated speed 3000 rpm; stall torque is 3.6 Nm against a continuous-rated 3 Nm, which is the headroom the S200 needs to command dynamic acceleration without tripping on the torque limit. Encoder is the absolute 17-bit singleturn (AS17bit) resolved through an angular connector — the resolver-style mounting cuts wiring errors at the panel compared to a flying-lead variant.
Mechanical fit and shaft side
Frame is shaft height 48 mm with a plain shaft, tolerance class N — no keyway, which simplifies coupling alignment when the load is belt- or pinion-driven rather than direct-coupled through a key. No holding brake is fitted; applications that must hold position with the drive de-energised need an external holding arrangement or a brake-equipped variant from the same 1FL2 family. Protection class IP65 with oil seal, so the motor body resists dust and low-pressure water jets — adequate for cabinet-side machine interiors and most factory washdown zones short of food-grade hose-down cleaning.
Catalog tags and compliance paperwork
Siemens lists this motor under Group Code R220, Product Group X0DK, sold as one piece per package. RoHS compliance has been in force since 01-01-18 and REACH Article 33 candidate-list information is published — both are standard EU substance-restriction declarations rather than a safety approval. Product class is the Siemens 'C' class — built to order, non-returnable, non-reusable credit — so a configurator spec is locked in at the time of purchase and cannot be revised post-shipment.
Sourcing posture for the BOM line
Because the part is built to order, the practical sourcing flow is a quoted RFQ with the full configuration string rather than a stock-pull — lead time and price-break ladder confirmed at quote, not at cart.