SIMOTICS S-1FL2 servo, paired to SINAMICS S200
The Siemens 1FL2205-2AF01-1SB0 is a SIMOTICS S-1FL2 low-inertia servomotor from the 1FL2 family, listed for use with the SINAMICS S200 drive system, which dictates the motor's electrical and mechanical interface rather than a generic third-party drive. Group code R220 and product group X0DK frame the catalog position under the SIMOTICS servomotor line. Supply voltage 400 V 3AC with a rated power Pn of 1 kW at Nn 3000 rpm — a 1 kW continuous point that places the motor in the light-duty bracket typical of S200 applications such as small packaging, pick-and-place and auxiliary feed axes. Stall torque M0 is 3.6 Nm against rated torque Mn of 3 Nm, so the overload headroom for acceleration peaks is modest. Mechanical build is 48 mm shaft height with a keyed shaft (tolerance N) and a 21-bit angular connector for the feedback channel — no holding brake fitted, which simplifies the install but means a vertical axis relying on this motor requires an external brake or counterbalance strategy. Protection class IP65 with oil seal makes the housing dust-tight and resistant to low-pressure water jets, suitable for shop-floor panels and machine enclosures where coolant splash and oil mist are routine. This is the integration envelope a panel builder needs to know before committing the BOM line.
Active production, built to order, traceable
Each motor ships as a single-piece quantity in a 382 x 222 x 240 mm pack, so receiving inspection logs the unit count 1:1 against the order — there is no multi-pack master carton to reconcile.
Supply posture for the BOM line
Build-to-order configuration under product class C means a confirmed RFQ needs the full order code, including connector orientation, brake option and feedback variant, before pricing can be locked. Independent distribution sources this code against the BOM at quote time; availability, lead time and volume breaks are confirmed at RFQ rather than read off a shelf.