Holding the 1FL2 form factor next to the SINAMICS S200
The 1FL2205-4AF01-0HB0 is a SIMOTICS 1FL2 low-inertia servomotor sized for the SINAMICS S200 drive family, supplied at 400 V 3AC with a 1.5 kW rated power, 3000 rpm nominal speed, 6 Nm stall torque (M0) and 4.6 Nm rated torque (Mn). Shaft height is 48 mm with a plain shaft, tolerance N, and a 17-bit absolute encoder delivered through the angular connector. Packaging is a single-piece shipper with carton dimensions of 382 x 222 x 240 mm — the box footprint is what the integrator actually receives at the dock, so plan the receiving bench and unpacking area around that envelope rather than the bare motor body.
Mechanical and environmental envelope
Protection class IP65 with oil seal is the headline environmental rating — the shaft seal is what keeps coolant and cutting fluid out of the bearing path, which is the failure mode that kills this motor class long before the windings give up. Mounting is on a 48 mm shaft-height flange to the SINAMICS S200 drive family, so the cabinet layout is set by that face dimension, not the cable tail. The motor ships without a holding brake, which keeps the rotor length shorter and the inertia lower for cyclic applications where the brake would never be called on — confirm with the cycle budget whether a power-off stop is required before locking this part code into the BOM.
Compliance and documentation pack
Substance compliance is declared to RoHS since 01-01-18 with REACH Article 33 information supplied against the current candidate list, and the part is not subject to AL or ECCN export controls. The order-code group code R220 and product group X0DK are the internal Siemens classification keys carried on the nameplate and the shipping paperwork. Product class is build-to-order — the motor is produced per order configuration rather than held as finished stock, which is what drives the standard Siemens lead-time profile on this line.