Servo motor for the SINAMICS S200 low-voltage drive
The 1FL2304-2AF11-1MB0: Servo motor: low-inertia SIMOTICS S-1FL2 unit, 400 V 3AC supply, 0.4 kW rated power at 3000 rpm, 1.45 Nm stall torque (M0) and 1.27 Nm rated torque (Mn), shaft height 45 mm. Sized for the small-frame end of a SINAMICS S200 cabinet — packaging lines, small-format feed axes, and laboratory automation where 0.4 kW is enough headroom. Mechanical package is keyed for repeatable mounting: shaft height 45 mm with shaft key (tolerance N), holding brake fitted, AM21 bit angular connector for the feedback / power lead, and IP65 protection class with oil seal at the shaft entry — so the motor holds up to light washdown and oily plant air that an IP54 standard motor would let through.
Match to a SINAMICS S200 drive line
Designated drive side is the SINAMICS S200 — the 1FL2 family is the matching low-voltage servo motor line, and the 400 V 3AC winding matches a S200 fed from a three-phase 400 V line. Commissioning moves directly into the S200 toolchain; resolver/encoder feedback enters the drive through the AM21 bit angular connector without an adapter.
Paperwork and customs posture
Compliance and customs posture is straightforward: RoHS compliance since 01-01-18, REACH Art. 33 duty-to-inform applies with current-candidate-list information available from the manufacturer, no export-control flag (AL: N / ECCN: N). Standard commercial HS classification applies at the dock; no special licence paperwork is needed for cross-border movement of this line.
Production status and order class
That combination means the motor is not pulled from a finished-goods buffer; it is configured and produced against the order. Lead time and current pricing are confirmed against the RFQ. Group Code R220 and Product Group X0DM are the internal procurement codes carried on the line — useful for matching the line against an existing BOM and for forwarding to procurement systems without re-keying.
Packaging and what arrives at the dock
Quantity unit is one piece per order, packed singly (packaging quantity 1) at 382 x 222 x 240 mm — a single-motor carton, not a multi-up pack. The carton dimension drives the freight class and the pallet plan when shipping more than a handful of units; budget roughly one-tenth of a standard Euro-pallet footprint per motor.