What the order code specifies
The SIMOTICS S-1FL2 servo motor, order code 1FL2304-4AF01-1HB0, is the 45 mm shaft-height member of the 1FL2 family sized to a 0.75 kW continuous rating on a 400 V 3AC supply, with a rated speed of 3000 rpm, a standstill torque M0 of 3.02 Nm and a rated torque Mn of 2.39 Nm — the 0.63 Nm margin between M0 and Mn is what the sizing math runs against when a peak load is being checked against the continuous envelope. The lifecycle record on this exact order code is active, which for a built-to-order item in Product Class C (made to order, non-returnable) means each unit is produced against a confirmed purchase order rather than held on a finished-goods shelf.
Mechanical fit, feedback, and the drive it pairs with
Encoder is the single-turn 17-bit version fed back through an angular connector — a connector-out design that keeps the cable bend radius on the machine side rather than the motor back face, which matters when the motor drops into a compact machine frame. Shaft is supplied with key and N tolerance, and there is no holding brake, so any vertical-axis safety stop has to come from the drive's braking chopper or a downstream mechanical brake. The motor is matched to the SINAMICS S200 drive family, and IP65 with oil seal is the rated sealing — appropriate for machine tools and packaging lines where coolant and lubricant mist reach the motor face, but the oil seal is the wear part on this build and belongs on the preventive-maintenance schedule rather than assumed permanent.
Codes that drive the back-office trail
Administrative codes on the record: Group Code R220, Product Group X0DM, packaging quantity 1 piece — these sit on the PO line and the dock-receipt paperwork, distinct from the functional ratings in the spec drawing.