Where does this 0.75 kW servo fit in a SINAMICS S200 line
The 1FL2306-1AC01-1SB0 is the shaft-height 65 mm, low-inertia member of the 1FL2 servomotor family that pairs with the SINAMICS S200 drive platform, drawing 400 V 3AC and delivering 0.75 kW rated power at 2000 rpm with a rated torque of 3.58 Nm and a static M0 of 3.7 Nm (cites:,). That torque ceiling is the operating point a sizing pass should start from — the rated continuous figure, not the headline kW number, sets the safe working envelope for cycle-loaded axes such as small packaging, labelling, and pick-and-place modules driven off the S200. Feedback is taken from an absolute 21-bit single-turn encoder (AS) on the non-drive end, and the shaft is a keyed, tolerance-N design without a holding brake (cites:). No holding brake means the motor cannot hold position when the drive is de-energised — any vertical axis application has to either accept a mechanical brake downstream or move to a brake-equipped variant within the same family.
Product class and what the order code locks in
Group code R220 and product group X0DM are the Siemens internal admin keys for this line (cites:,). They are the handles to use when chasing order confirmation, delivery status, or warranty documentation through a Siemens-affiliated channel — not selectors, but useful as cross-references when a PO line has to be reconciled against the factory build sheet.
Compliance pack carried on the line
The motor is compliant with the RoHS substance restrictions from 01-01-18 onward, and REACH Article 33 candidate-list information is supplied with the product (cites:,). Export-control markings are AL:N / ECCN:N, which means no special-export licence is triggered on shipment under the standard regimes (cites:).
Lifecycle status and how to source it
Lifecycle stage reads as current and the official product status is Active (cites:,). Independent distribution sources the 1FL2306-1AC01-1SB0 against an RFQ — the order code is built to order, so unit price and lead time are confirmed at quote time on the requested quantity, not pulled off a stock tick. Packaging is one piece per shipper at 392 x 269 x 286 mm (cites:,).