SIMOTICS S-1FL2 servomotor for SINAMICS S200 — what it carries
The 1FL2306-6AC01-1HB0: This is a Siemens SIMOTICS S-1FL2 servomotor, part of the 1FL2 family designed to pair with the SINAMICS S200 drive series. It delivers 1.75 kW continuous power from a 400 V three-phase supply, spinning at 2000 rpm rated speed. Rated torque sits at 8.36 Nm, with a holding torque of 8.8 Nm at standstill — enough to keep a load locked without a brake on the motor itself. The shaft height is 65 mm, with a keyed shaft and tolerance N for standard fit. The feedback is a 17-bit absolute encoder with an angular connector, giving position resolution down to about 0.0027 degrees per count — plenty for most servo positioning loops on conveyors, rotary tables, or pick-and-place axes.
IP65 protection and the oil seal — real washdown readiness
The housing carries IP65 protection with an oil seal on the output shaft. That means it handles direct spray from washdown hoses and airborne dust — common on food processing lines, packaging floors, and machining centers where coolant mist is constant. No holding brake on this variant, so the load must be held by the drive's holding brake or an external mechanical brake when power is off. If you need a brake, look at the -1HBx variants in the same family.
Active production and sourcing posture
Because it's a made-to-order product class (C), it's not typically sitting on a shelf. We quote it against your BOM quantity and confirm lead time and pricing at RFQ — standard practice for servo motors that ship direct from the factory. Export control is straightforward: AL: N / ECCN: N, so no special licensing needed for most destinations.