1.75 kW servomotor for SINAMICS S200 — shaft height 65 mm, holding brake
The 1FL2306-6AC11-1HB0 is a SIMOTICS S-1FL2 servomotor rated at 1.75 kW on a 400 V 3AC supply, with a rated speed of 2000 rpm. It delivers 8.8 Nm holding torque (M0) and 8.36 Nm rated torque (Mn), making it a direct match for SINAMICS S200 drives in the same power class. Shaft height is 65 mm with a key and tolerance N. The motor includes a holding brake and an AS17 bit absolute encoder with an angular connector — that's the feedback resolution you need for position loops on a compact machine axis without a separate encoder cable.
Lifecycle status is active per the manufacturer. This is not a phase-out or NRND line — the 1FL2 series remains the current-generation servomotor for SINAMICS S200. Export control is AL: N / ECCN: N, so no special licensing for cross-border shipment in most regions. RoHS compliance effective from 01-01-18; REACH candidate list information is published.
IP65 with oil seal — washdown-capable, no secondary guarding needed
Protection class IP65 with an oil seal means the motor body withstands hose-down and coolant splash in machining centres or food-grade conveyors. The oil seal at the shaft exit keeps cutting fluid out of the bearing cavity — that's one less failure mode on a wet line. Packaging dimensions are 466 x 269 x 286 mm — plan for a shelf footprint about the size of a shoebox. The unit ships as a single piece.