Motor ratings and drive pairing
The 1FL2306-6AC11-1SB0: Rated at 1.75 kW on 400 V 3AC supply, 2000 rpm rated speed, with 8.36 Nm continuous torque and 8.8 Nm standstill torque. The 65 mm shaft height and keyed shaft with tolerance N match the SINAMICS S200 drive series — confirm the drive firmware version supports this encoder type before wiring.
Encoder, brake, and sealing
21-bit absolute encoder with an angular connector gives position feedback without a home cycle — the drive reads the absolute position on power-up. The holding brake holds the load on power-off, critical for vertical-axis or Z-axis applications where the load must not drift. IP65 with oil seal means the motor body and shaft seal withstand washdown and oil mist; the connector must be mated to maintain the rating.
Compliance and documentation
RoHS compliant since January 1, 2018, and REACH Article 33 duty-to-inform documentation is available. Export control is AL: N / ECCN: N — no special license required for most destinations. The product class C designation means this is a made-to-order unit; it cannot be returned for credit once produced.