Motor ratings and drive pairing
The 1FL2306-7AC01-0HB0 is a 2 kW servomotor from the SIMOTICS S-1FL2 family, matched to the SINAMICS S200 drive series. Rated speed is 2000 rpm with a holding torque of 13.3 Nm and a continuous rated torque of 9.55 Nm — the holding torque figure tells you the stall capability at zero speed, which governs positioning stiffness during a controlled stop. The 65 mm shaft height and plain shaft with tolerance N mean the coupling bore must be sized to the shaft OD at the specified fit class — no keyway, so torque transfer relies on the clamping force of the coupling.
IP65 and environmental sealing
The oil seal specifically keeps cutting fluids out of the bearing cavity, which is the common failure point on unsealed servos in wet machining cells. The AS17bit absolute encoder gives 17-bit single-turn resolution — enough for positioning tasks that need repeatability within a few arc-minutes per revolution. The angular connector keeps the encoder cable exit oriented along the motor axis, saving radial clearance in tight cable-tray runs.
Order class and compliance
Product class C means this unit is manufactured to order and cannot be returned for credit — confirm the BOM line before committing. The packaging footprint is 466 x 269 x 286 mm, which fits a standard Euro-pallet layer for consolidated shipments. Export control is AL: N / ECCN: N, so no special license is needed for cross-border shipment within normal industrial trade.