Motor ratings and mechanical fit for the application
The 1FL2306-7AC01-0MB0 is a 2 kW servomotor from the SIMOTICS S-1FL2 family, designed to pair with SINAMICS S200 drives. It delivers 13.3 Nm holding torque (M0) and 9.55 Nm rated torque (Mn) at 2000 rpm rated speed, on a 400 V 3AC supply. Shaft height is 65 mm with a plain shaft, tolerance N, and no holding brake. The IP65 rating with oil seal means the motor body withstands washdown and oil-mist environments common in machine-tool and packaging lines — the seal at the shaft exit keeps coolant out of the bearing cavity.
Encoder and cabling — what the angular connector means for integration
The AM21bit absolute encoder provides 21-bit single-turn resolution over an angular connector. The angular exit routes the cable along the motor body rather than straight out the back, which saves axial space in tight axis layouts — the cable bend radius stays within the manufacturer's spec without a secondary strain relief bracket. The motor is supplied without a holding brake. If the vertical axis or Z-axis application requires holding torque at power-off, an external brake or a brake-equipped variant must be selected at the BOM stage — retrofitting a brake to this plain-shaft motor is not supported.