The 1FL2306-7AC01-1HB0: Because it is a made-to-order product class (C), standard stock is not held; quantities are quoted against the BOM with lead time and pricing confirmed at RFQ. The unit ships as a single piece in packaging measuring 466 x 269 x 286 mm.
Rated torque and speed for the application
Rated power is 2 kW at 2000 rpm, with a standstill torque of 13.3 Nm and a rated torque of 9.55 Nm. The 400 V three-phase supply voltage and 65 mm shaft height place it in the medium-torque range of the S-1FL2 family — sized for indexing, positioning, and light-to-medium load cycles on a conveyor or rotary table. The IP65 protection class with oil seal means the motor body and shaft seal withstand washdown and coolant splash — suitable for machine-tool or food-grade environments where the motor is mounted directly on the machine frame, not in a separate cabinet.
Connector and feedback interface
The angular connector (AS17bit) carries the feedback and power in a single plug — the 17-bit absolute encoder provides position resolution for closed-loop servo control without a separate encoder cable. No holding brake is fitted on this variant, so the load must be held by the drive's holding brake or an external mechanical brake when power is off. The shaft key and tolerance N (normal) are standard for direct coupling to a load via a flexible coupling or timing pulley. Confirm the mating half's bore and keyway dimensions against the 65 mm shaft height before specifying.
Compliance and documentation
RoHS compliant since January 1, 2018, and REACH Article 33 information is available on request. Export control classification is AL: N / ECCN: N — no special licensing required for most destinations.