What this servomotor delivers for a SINAMICS S200 line
The 1FL2306-7AC01-1SB0 is a SIMOTICS S-1FL2 servomotor matched to the SINAMICS S200 drive series, rated 2 kW at 400 V 3AC supply with a rated speed of 2000 rpm. Holding torque is 13.3 Nm at standstill and 9.55 Nm continuous — figures that govern acceleration and load-holding on a pick-and-place or indexing axis. Shaft height is 65 mm with a shaft key (tolerance N) and no holding brake; the angular connector carries the AS21bit encoder feedback for the S200 drive.
IP65 rating and oil seal — what it means on a production floor
The oil seal on the shaft extension keeps cutting fluid and lubricant out of the bearing cavity; without a holding brake, the motor relies on the drive's holding torque at standstill.
Compliance and documentation for the BOM file
RoHS compliant since 01-01-18 and REACH Article 33 information is available — both required for EU market placement and for OEM equipment declarations under the Machinery Directive.
Sourcing and lifecycle status
This is a product class C item (manufactured/produced to order), so it is not held as off-the-shelf stock; quantities are quoted against the BOM with lead time confirmed at RFQ. Packaged singly in a 466 x 269 x 286 mm carton — the dimensions matter for freight consolidation if ordering multiple units.