What this servomotor delivers for a SINAMICS S200 line
The 1FL2306-7AC11-1HB0 is a SIMOTICS S-1FL2 servomotor rated at 2 kW on 400 V three-phase supply, with a rated speed of 2000 rpm. It delivers a holding torque (M0) of 13.3 Nm and a rated torque (Mn) of 9.55 Nm — the holding torque is what the brake locks at standstill, not the continuous drive rating. This motor is purpose-built for the SINAMICS S200 drive family. The shaft height is 65 mm, and it comes with an angular connector (AS17bit encoder), a shaft key (tolerance N), and a holding brake. The IP65 rating with oil seal means it handles washdown and oily environments without an extra enclosure — common on conveyor and packaging lines where coolant mist is present.
Active lifecycle — no obsolescence risk
RoHS compliance is confirmed from January 1, 2018. REACH Article 33 candidate-list information is on file — the standard documentation package covers both directives for EU-market installations.
Integration checklist with SINAMICS S200
The motor uses an angular connector with AS17bit encoder feedback — this is a single-cable solution (power + encoder combined) that mates directly to the S200 drive's motor connector. No separate encoder cable needed. Shaft height 65 mm with key and tolerance N means the mounting flange and shaft dimensions match the standard SIMOTICS S-1FL2 mechanical interface. The holding brake is wired separately from the motor power; the S200 drive has a dedicated brake control output that must be configured in the drive parameters. IP65 with oil seal: the motor body and connector are rated for washdown, but the shaft seal is an oil seal — not a double-lip or high-pressure seal. For direct coolant spray on the shaft, consider a shaft cover or a higher IP rating variant.