Motor ratings and drive pairing
The 1FL2310-0AC01-0MB0 is a SIMOTICS S-1FL2 servomotor delivering 2.5 kW at 2000 rpm rated speed, with a rated torque of 11.9 Nm and a standstill torque of 12.6 Nm. The 400 V 3AC supply voltage and shaft height of 90 mm are sized for the SINAMICS S200 drive series — the matching drive is listed as part of the system definition. The AM21bit absolute encoder with angular connector provides position feedback for closed-loop motion control. IP65 protection with an oil seal means the motor body withstands washdown and cutting-fluid exposure in machine-tool or packaging-line environments.
Production status and ordering constraints
Export control classification is AL: N / ECCN: N, so no special licensing is required for standard cross-border shipments. RoHS compliance is confirmed since January 2018;.
Mechanical interface and mounting
Shaft height 90 mm with a plain shaft (tolerance N) and no holding brake — the load-holding function must be handled externally or by the drive's holding brake if fitted. The angular connector exits at 90° to the motor axis, which saves axial space in tight enclosures but requires radial clearance for the mating cable. Packaging dimensions are 495 x 369 x 335 mm for a single unit. The IP65 rating with oil seal suits direct mounting in wet or contaminated zones without a secondary enclosure, though the cable entry point must also be sealed to maintain the protection class.