Motor ratings that govern the axis
The 1FL2310-0AC01-1MB0: Rated for 400 V three-phase input, this SIMOTICS S-1FL2 delivers 2.5 kW continuous power at 2000 rpm base speed. Stall torque is 12.6 Nm; rated torque is 11.9 Nm — the 0.7 Nm gap is the thermal margin at full speed. The 90 mm shaft height places it in the medium-frame class for SINAMICS S200 applications. The AM21bit absolute encoder (21-bit single-turn) provides position feedback without a home cycle on power-up, which is the standard for S200 servo loops. No holding brake is fitted — the axis relies on the drive's holding torque or an external brake for vertical loads. IP65 protection with an oil seal means the motor body and shaft entry withstand washdown and oil mist common in machine-tool and packaging lines. The shaft key (tolerance N) and angular connector are specified for direct coupling to a load and right-angle cable exit in tight cabinets.
Compliance and sourcing posture
RoHS compliant since January 2018, with REACH Article 33 candidate-list disclosure on file. Export control classification is AL: N / ECCN: N — no special licensing for most destinations. Packaging dimensions are 495 x 369 x 335 mm for a single unit. Quoted to order against the BOM through independent distribution. No pin-compatible alternative exists in the 1FL2 family — the matching drive is SINAMICS S200, and the motor is selected by power, speed, encoder type, and brake requirement.