Active production — what it means for your BOM
The 1FL2310-4AC11-1SB0: The product class is C: manufactured to order, not a stocked shelf item. That means the unit is built against your order and cannot be returned for credit — confirm the BOM line before committing.
5 kW, 2000 rpm — the ratings that drive the selection
Rated power is 5 kW at 2000 rpm nominal speed, supplied from a 400 V three-phase line. The holding torque M0 is 25.2 Nm, with continuous stall torque Mn at 23.9 Nm — this sets the acceleration ceiling for the load inertia match. Shaft height is 90 mm, with a shaft key and tolerance N. The holding brake is integrated — it engages when power is removed, holding the vertical axis load without a separate mechanical brake. Protection class IP65 with oil seal means the motor body and shaft seal withstand washdown and cutting fluid mist — suitable for machine-tool spindles and food-grade conveyors where coolant spray is present.
System fit — SINAMICS S200 and encoder interface
This motor is part of the 1FL2 servomotor family, designed to pair with SINAMICS S200 drives. The angular connector carries the AS21bit encoder signal — a single-cable solution for feedback and power, reducing wiring in the cabinet. Packaging dimensions are 595 x 369 x 407 mm — a single-piece shipment. The unit ships one per box.
Compliance and regulatory documentation
RoHS compliant since January 1, 2018. Export control classification is AL: N / ECCN: N — no special license required for standard industrial shipments.