The 1FL2310-4AC11-1HB0: Sourced through authorized distribution channels against your BOM quantity.
Rated 5 kW at 2000 rpm rated speed, with 23.9 Nm continuous torque (Mn) and 25.2 Nm standstill torque (M0). The 2000 rpm base speed suits direct-drive applications like conveyors, indexing tables, and spindle feeds where the load matches the motor's torque-speed curve without a gearbox. Supply voltage is 400 V three-phase AC, matching standard European industrial mains. The motor is designed to pair with the SINAMICS S200 drive series — confirm the drive firmware and motor model selection in the commissioning wizard. Shaft height 90 mm with a keyed shaft (tolerance N) and an integrated holding brake. The brake holds the vertical load at standstill without a separate mechanical brake — factor the brake release time into the sequence logic.
IP65 with oil seal — washdown and wet-floor deployment
Protection class IP65 with oil seal means the motor body and shaft seal resist dust ingress and low-pressure water jets from any direction. Suitable for food-and-beverage washdown zones, machining coolant splash, and outdoor installations under cover — not submersible. The AS17bit absolute encoder (angular connector) provides 17-bit single-turn position feedback. No battery backup needed for multi-turn tracking — the SINAMICS S200 drive handles the homing sequence on power-up.
Compliance and documentation
RoHS compliant since 01-01-18. Export control classification: AL N / ECCN N — no special license required for cross-border shipment to most destinations. Group code R220, product group X0DM for internal cataloguing.