Motor ratings and drive pairing
The 1FL2310-6AC01-0HB0: This SIMOTICS S-1FL2 servomotor delivers 7 kW continuous power at 2000 rpm rated speed, with a stall torque M0 of 35.2 Nm and a rated torque Mn of 33.4 Nm — the 2 Nm margin means the motor holds full torque through brief overloads without dropping out of the speed loop. The 90 mm shaft height and plain shaft (tolerance N, no keyway) mate directly to the load coupling; the absence of a holding brake means the load must be held by the drive's holding brake or an external mechanical brake when power is off.
Environmental sealing and integration
IP65 with oil seal means the motor body and shaft seal withstand direct hose-down and oil mist — suitable for food processing, machine tool coolant, or washdown zones where IP54 would let moisture ingress through the bearing seal over time. The angular connector (AS17bit) exits the motor axially or radially depending on mounting orientation — plan cable strain relief to avoid pulling on the encoder connector during axis travel.
Lifecycle and ordering reality
RoHS compliant since January 1, 2018, with REACH candidate list data available on request — the compliance documentation covers EU regulatory requirements for machine builders shipping into the European market.