Is 1FL2310-6AC11-0MB0 still in active production?
The motor is built to order under product class C — manufactured to the buyer's configuration, not held as a returnable stock item — which is standard for this SIMOTICS S-1FL2 shaft-height frame. Quoted lead times and minimum order quantities are confirmed at RFQ rather than read off a price list.
What 1FL2310-6AC11-0MB0 delivers on the shaft
The motor runs from a 400 V 3AC supply and delivers a rated power Pn of 7 kW at a rated speed Nn of 2000 rpm, with continuous torque Mn of 33.4 Nm and stall torque M0 of 35.2 Nm on a 90 mm shaft-height frame. In a SINAMICS S200 axis that means a mid-frame sizing point — roughly the duty band where indexing conveyors, small-format machine-tool spindles, and packaging rotary tables live — so the inverter pairing is constrained to the S200 platform the family is built around. Feedback is via the AM21-bit absolute encoder, the plain shaft is supplied to tolerance N with no key, and an integral holding brake is fitted — the usual combination for a vertical-axis or emergency-stop duty where the brake must hold the load with the drive off. The body carries IP65 protection with an oil seal on the shaft pass-through, so the motor tolerates plant-side coolant spray and oil mist typical of a metal-cutting or food-adjacent cell; the matching inverter side of the system is the SINAMICS S200.
Compliance, classification, and what ships in the box
The motor has been RoHS-compliant since 01-01-18 and carries a REACH Article 33 duty-to-inform note on the current SVHC candidate list, both standard for SIMOTICS S-1FL2 units shipped into the EU/UK markets. Export control is AL:N / ECCN:N — no special licence is triggered for typical industrial destinations.