7 kW, 35.2 Nm standstill, 400 V 3AC
Siemens 1FL2310-6AC11-1HB0 is a SIMOTICS S-1FL2 low-inertia servomotor rated 400 V 3AC supply with a rated power Pn of 7 kW at 2000 rpm, a standstill torque M0 of 35.2 Nm and a rated torque Mn of 33.4 Nm — that torque envelope is what sizes it against the driven load (conveyor, index table, packaging axis) rather than the kilowatt figure alone. The motor carries shaft height 90 mm, an absolute encoder AS17 bit, a keyed shaft with tolerance N, an integrated holding brake, and IP65 protection with an oil seal — meaning the housing and shaft exit are sealed for plant-floor washdown and oily environments, and the brake holds the axis in position when the drive stage is de-energized. It is the motor half of the 1FL2 family matched to the SINAMICS S200 drive system, so the drive electronics, cable set and connector family are co-specified on the same line — picking the motor without confirming the matching SINAMICS S200 slot will leave the commissioning engineer with mismatched feedback scaling.
Built-to-order, RoHS since 2018
The product is classified as a build-to-order item — produced to order, not reusable or returnable for credit — so a quote against the BOM with the configured options (shaft, brake, encoder, connector) is the normal purchasing path.
Sourcing posture — active line, quoted to order
Single-piece packaging is 595.00 x 369.00 x 407.00 mm for the servomotor — the box is the long way round because the motor and its connector backshell are not folded, so receiving needs to plan dock space accordingly when multiples arrive together.