Servomotor for the SINAMICS S200 PN family
The 1FL2310-6AC11-1SB0 is a low-voltage servomotor from the SIMOTICS S-1FL2 family, designed and shipped as a matched drive package for the SINAMICS S200 PN drive line — a 7 kW, 400 V 3AC machine in a 90 mm frame. It carries the 1FL2 ordering pattern: shaft height 90 mm, holding brake, keyed shaft with N tolerance, 21-bit absolute encoder delivered through the angular connector, and IP65 sealing at the body and shaft seal — the build sheet is set, no field option list.
Headline ratings and what they let the motor do
Rated continuous power is 7 kW at a nominal 2000 rpm, with standstill torque M0 of 35.2 Nm and rated torque Mn of 33.4 Nm — the small M0/Mn drop means the motor keeps most of its continuous torque at zero speed, the regime a positioning axis lives in while clamping before the move. 400 V 3AC supply matches a SINAMICS S200 line input; the 21-bit encoder (≈2 million counts/rev) is what the S200 drive resolves for absolute positioning on first power-up, so pairing the motor to the S200 inverter avoids the resolver/encoder hand-shake that a third-party motor would force. IP65 with oil seal on the shaft throughlet keeps coolant and cutting fluid out of the bearing housing — the spec the machine-tool builder needs to write on the panel drawing, not just the IP rating printed on the nameplate.
Production class and supply window
Product class is C — built to order, non-returnable for credit — so the configurator matters more than the shopping cart. Group code R220 and product group X0DM are the internal handles the factory uses to key this into the S-1FL2 production line. Packaging is a single-piece shipper at roughly 595 × 369 × 407 mm — a cabinet-floor crate, not a carton-on-shelf, consistent with the made-to-order class.
Compliance and export posture
RoHS substance restriction has applied since 01-01-18, and REACH Article 33 disclosure is supplied with the shipment — the documentation set a machine builder's declaration-of-conformance pack will reference when the motor ships into an EU-bound line. Export control classification on the line card reads AL:N / ECCN:N — no license trigger on the commercial paperwork, no controlled-goods escalation in the export review.
Sourcing posture from the independent channel
Quoted to order against the BOM line: independent distribution carries the active S-1FL2 line into RFQ-time pricing rather than pegging to a stock number — confirmed at quote with the configured option code intact, lead time scoped by the factory's class-C build slot.