Active production — no lifecycle risk
The 1FL6042-1AF61-0AB1: This means the motor is available through standard Siemens distribution channels, not limited to surplus or last-time-buy inventory.
0.4 kW, 3000 rpm — what ships in the carton
This is a SIMOTICS S-1FL6 servo motor, designated as a spare part, rated 0.4 kW at 3000 rpm with a continuous torque of 1.27 Nm and a peak torque (M0) of 1.9 Nm. The shaft height is 45 mm, fitted with a feather key (tolerance N) and an incremental TTL encoder at 2500 increments per revolution — the encoder resolution matches the SINAMICS V70 and V90 drive families for closed-loop speed and position control. A holding brake is integrated, so the motor holds its position when power is removed — no external brake resistor or mechanical lock required on the load side.
IP65 with sealing ring — washdown-ready build
The motor carries IP65 protection with a sealing ring at the shaft exit — the housing and connector interface resist water jets and dust ingress, making it suitable for food-and-bev washdown zones or coolant-laden machining environments. The 400 V 3 AC winding is compatible with the SINAMICS V70 and V90 servo drives — no additional line reactor or filter is mandated by the motor itself, though drive-side EMC filtering follows the drive installation manual.